We work with popular routers and networking equipment

Supported brands
ASUS
Huawei
Keenetic
TP-Link
MikroTik
Ubiquiti
Cisco
Xiaomi
Zyxel
D-Link
Tenda
Mercusys
Netgear
Linksys
ZTE
UniFi
i
Note

All our services for Wi-Fi setup, routers, DNS, IPTV, ping, firewall, local network, and router repair are performed only on the side of your internal network and user equipment. We do not provide services on the internet provider’s side and are not authorized to interfere with provider lines, provider devices, or equipment. If the problem is on the provider’s side, you must contact your internet operator directly for such work.

M.E.R.Y.O.S.A.B Electronics · IT Services

Wi-Fi Setup, Router Configuration & Network Equipment Repair

Professional Wi-Fi and router setup for stable internet, good coverage, a secure network, and reliable performance of all devices. We configure routers, DNS, firmware, improve ping, connect equipment, and also perform router repair, soldering, and recovery from hardware malfunctions.

Stable Signal Network Protection Device Connection Ping Improvement DNS Configuration Router Firmware Router Repair Soldering & Recovery Board Diagnostics Port & Power Repair Belet / Horjun / Alem TV / IPTV Firewall QoS & Traffic Prioritization
What We Configure & Repair

Home routers, office networks, access points, Mesh systems, switches, client devices, IPTV services, and the routers themselves at the level of configuration and repair.

What We Improve

Speed, coverage, connection stability, network response, security, proper service operation, and router recovery from hardware or software failures.

Where We Work

Apartments, houses, offices, shops, warehouses, workshops, and workspaces with multiple coverage zones and a large number of devices.

What’s Included in the Service

It’s not just “setting a password.” We configure the entire network logic: internet, routing, DNS, security, stability, firmware updates, equipment connection, and if necessary — router repair with soldering and hardware recovery.

📶

Wi-Fi Setup

We select optimal wireless network parameters for reliable coverage and stable internet performance.

  • 2.4 GHz & 5 GHz Setup
  • Channel & Channel Width Selection
  • Coverage Zone Optimization
  • Mesh & Access Point Setup
🔐

Network Protection & Security

We configure the network so that random neighbors, unwanted devices, and other freeloaders can’t use your internet.

  • Changing Default Passwords
  • Encryption & Access Setup
  • Guest Network for Visitors
  • Restricting Unwanted Connections
🖧

Device Connection

We connect and test all devices that require internet or a local network.

  • PCs and Laptops
  • TVs and Set-top Boxes
  • Printers and Cash Registers
  • Cameras, Smart Home, IoT
🌐

DNS Configuration and Optimization

We replace problematic DNS, configure more stable domain resolution, and reduce delays when opening websites and services.

  • Manual DNS Configuration
  • Service Access Optimization
  • Reducing Website Loading Delays
  • Diagnosing Domain Name Issues

Improving Ping and Stability

We check the network, eliminate unnecessary packet loss, and configure the router for smoother and more predictable performance.

  • Latency and Packet Loss Testing
  • Router Parameter Optimization
  • Priority for Important Devices
  • Reducing Local Network Conflicts
🛠️

Router Firmware and Updates

We update the router’s firmware, check compatibility, and restore order to its operation after failed settings or outdated software.

  • Official Firmware Update
  • Recovery After Configuration Errors
  • Post-Update Optimization
  • Basic Stability Check
📺

Belet, Horjun, Alem TV, and IPTV

We configure the internet and router so that Belet, Horjun, Alem TV, and IPTV launch faster, work more stably, and don’t take too long to load.

  • Network Optimization for IPTV Services
  • DNS and Routing Configuration
  • Reducing Long Load Times and Freezes
  • Testing on TVs and Set-top Boxes
🛡️

Firewall Setup and Access Control

We configure basic router and network protection: restrict unnecessary access, close unneeded rules, and help make the network more secure.

  • Basic Firewall Configuration
  • Restricting Unnecessary Connections
  • Device Access Control
  • Enhancing Network Security
🚀

QoS and Traffic Prioritization

We configure internet priority for important tasks: video calls, IPTV, work, gaming, and devices that need a stable, lag-free channel.

  • Priority for Important Devices
  • Stability for Calls and Streaming
  • Traffic Optimization for IPTV and Work
  • Reducing Network Congestion
🔧

Router Repair and Hardware Recovery

We perform router and network equipment repair: board diagnostics, soldering, component replacement, and recovery after hardware failures.

  • CPU and RAM Replacement
  • LAN/WAN Interface Repair or Replacement
  • Soldering, Trace and Component Recovery
  • Firmware and Startup After Repair
🔬

Board Diagnostics and Fault Finding

We perform technical diagnostics of routers and network equipment: finding the cause of unstable operation, overheating, short circuits, and boot failures.

  • Board and Power Supply Check
  • Faulty Component Identification
  • Overheating and Instability Diagnostics
  • Determining Device Failure Cause
🔌

Power Supply, Connector, and Port Repair

We restore damaged power connectors, LAN/WAN ports, and contact areas after mechanical damage, oxidation, or power surges.

  • Power Connector Repair
  • LAN/WAN Port Replacement and Restoration
  • Soldering and Contact Pad Recovery
  • Post-Repair Testing Under Load

What It’s Suitable For

This service is suitable both when the network “doesn’t work at all” and when it works, but poorly: internet drops out, ping spikes, devices disconnect, coverage is weak, the router has a mind of its own, Belet, Horjun, Alem TV, or IPTV take too long to load, or the router itself needs repair.

Common Problems

  • Weak Wi-Fi in distant rooms
  • Internet drops out or freezes
  • High ping and unstable connection
  • Websites load slowly
  • TVs, cameras, printers won’t connect
  • Everything stopped working after a router reset
  • Need to connect many devices at the office or home
  • Belet, Horjun, Alem TV, or IPTV take too long to load
  • Need access control and network protection
  • Important services lag due to channel overload
  • Router won’t turn on or works unstably
  • Damaged LAN/WAN ports, power supply, or board

What can be done

  • Set up the router from scratch
  • Connect and check all devices
  • Separate home and work networks
  • Set up guest access
  • Optimize Wi-Fi for the premises
  • Update firmware and fix errors
  • Make the network more stable and secure
  • Configure the network for faster IPTV operation
  • Enable access control and basic protection
  • Set traffic priorities for important tasks
  • Repair the router and restore its operation
  • Replace damaged components, power supply, and ports

How the work is done

We don’t work by guesswork, but step by step: first, we identify the problem, then configure, repair if necessary, test, and bring the network to a normal state.

01

Diagnostics

We check the router, signal, channels, connected devices, DNS, packet loss, overall network layout, IPTV service operation, and the device’s hardware condition.

02

Configuration

We configure Wi-Fi, security, addressing, DNS, access parameters, firewall, traffic priorities, IPTV, and device connections.

03

Repair and Recovery

If necessary, we perform soldering, replace CPU, RAM, repair power supply, restore ports, flash firmware, and start the device after repair.

04

Result Verification

We check speed, response time, coverage area, device operation, actual loading of Belet, Horjun, Alem TV, and IPTV, as well as stability after repair.

You can buy a router and immediately order setup

If you don’t have suitable equipment yet, users can first buy a router or other networking equipment, and then immediately order the setup service online or by phone. This is convenient when you need not just “something connected,” but a proper, stable, and secure network right away. And if you already have a router but it’s faulty — you can also order its repair.

🛒

Buy routers and networking equipment

The website has a section with networking equipment where users can choose routers and other devices to ensure stable internet operation at home, in the office, in a warehouse, or in a workspace.

  • Equipment selection for your task
  • Routers and networking devices
  • Solutions for home and business
  • Go to equipment catalog
📝

Order service online

After selecting equipment or if you already have a router, the user can submit an online request for setup, connection, firmware update, ping improvement, DNS configuration, router repair, Belet, Horjun, Alem TV, IPTV, and other networking services.

  • Convenient online request
  • For home, office, and business
  • Setup and repair can be ordered
  • Go to online request
📞

Order services by phone

If it’s more convenient to discuss the task immediately, you can call and place an order for Wi-Fi setup, router setup, repair, device connection, IPTV, or network diagnostics directly.

  • Phone for ordering services
  • +993 63 705953
  • Quick task coordination
  • Suitable for urgent requests

Why choose this service

Because good Wi-Fi isn’t about “the router’s lights blinking,” but about everything actually working: phones, TVs, cameras, laptops, IPTV, and office equipment.

Comprehensive Approach

We configure not just the password and network name, but the entire infrastructure around the router, TVs, IPTV, and devices. If needed, we also repair the router itself.

Tailored to Real Spaces

Home, office, warehouse, workshop — we select a solution based on the number of rooms, walls, floors, equipment, and coverage quality.

Clear Result

After setup or repair, you should have a stable network, fast service loading, normal performance for Belet, Horjun, Alem TV, and IPTV, as well as a more secure and manageable network.

Need Wi-Fi setup, router configuration, IPTV setup, or repair?

If your internet is unstable, the signal is weak, devices won’t connect, Belet, Horjun, Alem TV, or IPTV load slowly, the router itself has errors or needs repair — order our service. We’ll find a solution for your home, office, warehouse, or workspace.

Buy a Router Go to Catalog
Online Request Submit an Online Request
Phone for Service Orders Call

Wi-Fi Setup, Router Configuration, IPTV, and Network Equipment Repair

We provide Wi-Fi and router setup services for homes, offices, warehouses, and businesses. We perform wireless network setup, router security, device connection, firmware updates, DNS optimization, connection quality improvement, and setup of Belet, Horjun, Alem TV, and IPTV for faster and more stable performance.

We also assist with firewall configuration, basic network protection, access control, traffic prioritization, and router repair: soldering, CPU/RAM replacement, board diagnostics, power supply repair, network interface restoration, and firmware reinstallation after repair.